Handling positional parameters¶

Intro¶

The day will come when you want to give arguments to your scripts. These arguments are known as positional parameters. Some relevant special parameters are described below:

These positional parameters reflect exactly what was given to the script when it was called.

Option-switch parsing (e.g. -h for displaying help) is not performed at this point.

See also the dictionary entry for "parameter".

The first argument¶

The very first argument you can access is referenced as $0. It is usually set to the script's name exactly as called, and it's set on shell initialization:

Testscript - it just echos $0:

#!/bin/bash
echo "$0"

You see, $0 is always set to the name the script is called with (> is the prompt...):

> ./testscript
./testscript

> /usr/bin/testscript
/usr/bin/testscript

However, this isn't true for login shells:

> echo "$0"
-bash

In other terms, $0 is not a positional parameter, it's a special parameter independent from the positional parameter list. It can be set to anything. In the ideal case it's the pathname of the script, but since this gets set on invocation, the invoking program can easily influence it (the login program does that for login shells, by prefixing a dash, for example).

Inside a function, $0 still behaves as described above. To get the function name, use $FUNCNAME.

Shifting¶

The builtin command shift is used to change the positional parameter values:

• $1 will be discarded
• $2 will become $1
• $3 will become $2
• ...
• in general: $N will become $N-1

The command can take a number as argument: Number of positions to shift. e.g. shift 4 shifts $5 to $1.

Using them¶

Enough theory, you want to access your script-arguments. Well, here we go.

One by one¶

One way is to access specific parameters:

#!/bin/bash
echo "Total number of arguments: $#"
echo "Argument 1: $1"
echo "Argument 2: $2"
echo "Argument 3: $3"
echo "Argument 4: $4"
echo "Argument 5: $5"

While useful in another situation, this way is lacks flexibility. The maximum number of arguments is a fixedvalue - which is a bad idea if you write a script that takes many filenames as arguments.

=> forget that one

Loops¶

There are several ways to loop through the positional parameters.

You can code a C-style for-loop using $# as the end value. On every iteration, the shift-command is used to shift the argument list:

numargs=$#
for ((i=1 ; i <= numargs ; i++))
do
    echo "$1"
    shift
done

Not very stylish, but usable. The numargs variable is used to store the initial value of $# because the shift command will change it as the script runs.

Another way to iterate one argument at a time is the for loop without a given wordlist. The loop uses the positional parameters as a wordlist:

for arg
do
    echo "$arg"
done

Advantage: The positional parameters will be preserved

The next method is similar to the first example (the for loop), but it doesn't test for reaching $#. It shifts and checks if $1 still expands to something, using the test command:

while [ "$1" ]
do
    echo "$1"
    shift
done

Looks nice, but has the disadvantage of stopping when $1 is empty (null-string). Let's modify it to run as long as $1 is defined (but may be null), using parameter expansion for an alternate value:

while [ "${1+defined}" ]; do
  echo "$1"
  shift
done

Getopts¶

There is a small tutorial dedicated to getopts (under construction).

Mass usage¶

All Positional Parameters¶

Sometimes it's necessary to just "relay" or "pass" given arguments to another program. It's very inefficient to do that in one of these loops, as you will destroy integrity, most likely (spaces!).

The shell developers created $* and $@ for this purpose.

As overview:

Without being quoted (double quotes), both have the same effect: All positional parameters from $1 to the last one used are expanded without any special handling.

When the $* special parameter is double quoted, it expands to the equivalent of: "$1c$2c$3c$4c........$N", where 'c' is the first character of IFS.

But when the $@ special parameter is used inside double quotes, it expands to the equivanent of...

"$1" "$2" "$3" "$4" ..... "$N"

...which reflects all positional parameters as they were set initially and passed to the script or function. If you want to re-use your positional parameters to call another program (for example in a wrapper-script), then this is the choice for you, use double quoted "$@".

Well, let's just say: You almost always want a quoted "$@"!

Range Of Positional Parameters¶

Another way to mass expand the positional parameters is similar to what is possible for a range of characters using substring expansion on normal parameters and the mass expansion range of arrays.

${@:START:COUNT}

${*:START:COUNT}

"${@:START:COUNT}"

"${*:START:COUNT}"

The rules for using @ or * and quoting are the same as above. This will expand COUNT number of positional parameters beginning at START. COUNT can be omitted (${@:START}), in which case, all positional parameters beginning at START are expanded.

If START is negative, the positional parameters are numbered in reverse starting with the last one.

COUNT may not be negative, i.e. the element count may not be decremented.

Example: START at the last positional parameter:

echo "${@: -1}"

Attention: As of Bash 4, a START of 0 includes the special parameter $0, i.e. the shell name or whatever $0 is set to, when the positional parameters are in use. A START of 1 begins at $1. In Bash 3 and older, both 0 and 1 began at $1.

Setting Positional Parameters¶

Setting positional parameters with command line arguments, is not the only way to set them. The builtin command, set may be used to "artificially" change the positional parameters from inside the script or function:

set "This is" my new "set of" positional parameters

# RESULTS IN
# $1: This is
# $2: my
# $3: new
# $4: set of
# $5: positional
# $6: parameters

It's wise to signal "end of options" when setting positional parameters this way. If not, the dashes might be interpreted as an option switch by set itself:

# both ways work, but behave differently. See the article about the set command!
set -- ...
set - ...

Alternately this will also preserve any verbose (-v) or tracing (-x) flags, which may otherwise be reset by set

set -$- ...

Production examples¶

Using a while loop¶

To make your program accept options as standard command syntax:

COMMAND [options] <params> # Like 'cat -A file.txt'

See simple option parsing code below. It's not that flexible. It doesn't auto-interpret combined options (-fu USER) but it works and is a good rudimentary way to parse your arguments.

#!/bin/sh
# Keeping options in alphabetical order makes it easy to add more.

while :
do
    case "$1" in
      -f | --file)
      file="$2"   # You may want to check validity of $2
      shift 2
      ;;
      -h | --help)
      display_help  # Call your function
      # no shifting needed here, we're done.
      exit 0
      ;;
      -u | --user)
      username="$2" # You may want to check validity of $2
      shift 2
      ;;
      -v | --verbose)
          #  It's better to assign a string, than a number like "verbose=1"
      #  because if you're debugging the script with "bash -x" code like this:
      #
      #    if [ "$verbose" ] ...
      #
      #  You will see:
      #
      #    if [ "verbose" ] ...
      #
          #  Instead of cryptic
      #
      #    if [ "1" ] ...
      #
      verbose="verbose"
      shift
      ;;
      --) # End of all options
      shift
      break;
      -*)
      echo "Error: Unknown option: $1" >&2
      exit 1
      ;;
      *)  # No more options
      break
      ;;
    esac
done

# End of file

Filter unwanted options with a wrapper script¶

This simple wrapper enables filtering unwanted options (here: -a and --all for ls) out of the command line. It reads the positional parameters and builds a filtered array consisting of them, then calls ls with the new option set. It also respects the -- as "end of options" for ls and doesn't change anything after it:

#!/bin/bash

# simple ls(1) wrapper that doesn't allow the -a option

options=()  # the buffer array for the parameters
eoo=0       # end of options reached

while [[ $1 ]]
do
    if ! ((eoo)); then
    case "$1" in
      -a)
          shift
          ;;
      --all)
          shift
          ;;
      -[^-]*a*|-a?*)
          options+=("${1//a}")
          shift
          ;;
      --)
          eoo=1
          options+=("$1")
          shift
          ;;
      *)
          options+=("$1")
          shift
          ;;
    esac
    else
    options+=("$1")

    # Another (worse) way of doing the same thing:
    # options=("${options[@]}" "$1")
    shift
    fi
done

/bin/ls "${options[@]}"

Using getopts¶

There is a small tutorial dedicated to getopts (under construction).

See also¶

• Internal: getopts_tutorial
• Internal: while_loop
• Internal: c_for
• Internal: arrays (for equivalent syntax for mass-expansion)
• Internal: Substring expansion on a parameter (for equivalent syntax for mass-expansion)
• Dictionary, internal: parameter

Comments